- Other Rubber Products[10]
- Material Handling Equipment Parts[1]
- Car Jacks[9]
- Other Textile Machinery[1]
- Other Hand Tools[1]
- Other Tools[7]
- Other Power Tools[2]
- Tool Parts[7]
- Putty Knife[1]
- Saw Blade[3]
- Refractometers[10]
- Ultrasonic[1]
- Milling Cutter[10]
- Milling Machine[1]
- Other Metal Processing Machinery[9]
- Sewing Machines[6]
- Packaging Machinery[10]
- Cable Manufacturing Equipment[10]
- Other Packaging Materials[8]
- Safety Gloves[2]
- Other Safety Products[3]
- Safety Helmet[1]
- Safety Clothing[5]
- Contact Person : Ms. Du Jessie
- Company Name : Kunshan Yuanhan Electronic Equipment Co., Ltd.
- Tel : 86-0512-57758500
- Fax : 86-0512-55007448
- Address : Jiangsu,Suzhou,Room 1401, Building 4, Jinrong Garden, Yushan Town
- Country/Region : China
- Zip : 215300
Rope cutter YH-9F
Preparation
A. Loosen the knurled nut when device is cold,
insert each leg of the blade and tighten the knurled
nuts, make sure that the blade and cutting head
have optimal contact.
B. Power on.
Cutting
A. Avoid direct short circuit between cutting heads.
B. switch on the hot knife to “ON”
C. Adjust the temperature from low to high range, one
can have a try on the small piece of foam
D. Close to the blade, and press a bit, the rope will be cut.
E. Clean the blade by brush.
Caution
A. Always operate the Hot Knife in well ventilated space
B. Never burn off excess residue on the hot knife blade. The blades will overheat, warping the blade.
C. DO NOT heat the blade when not operating, otherwise, the blade may warp.
D. Allow blades to cool before handling. A hot blade may cause injury or burns to exposed surfaces
Specification:
Model | YH-9F |
Voltage | AC230V/50Hz |
Weight | 1.5Kg |
Power | MAX.60W |
Temp. of blade | Up to 500°C in seconds |
Power cord length | 2.5M |
Size | 20/11/9cm |
Rope cutter YH-9F
